Deorbiter CubeSat mission design

This paper presents the mission design for a CubeSat-based active debris removal approach intended for transferring sizable debris objects from low-Earth orbit to a deorbit altitude of 100 km. The mission consists of a mothership spacecraft that carries and deploys several debris-removing nanosatellites, called Deorbiter CubeSats. Each Deorbiter is designed based on the utilization of an eight-unit CubeSat form factor and commercially-available components with significant flight heritage. The mothership spacecraft delivers Deorbiter CubeSats to the vicinity of a predetermined target debris, through performing a long-range rendezvous maneuver. Through a formation flying maneuver, the mothership then performs in-situ measurements of debris shape and orbital state. Upon release from the mothership, each Deorbiter CubeSat proceeds to performing a rendezvous and attachment maneuver with a debris object. Once attached to the debris, the CubeSat performs a detumbling maneuver, by which the residual angular momentum of the CubeSat-debris system is dumped using Deorbiter’s onboard reaction wheels. After stabilizing the attitude motion of the combined Deorbiter-debris system, the CubeSat proceeds to performing a deorbiting maneuver, i.e., reducing system’s altitude so much so that the bodies disintegrate and burn up due to atmospheric drag, typically at around 100 km above the Earth surface. The attitude and orbital maneuvers that are planned for the mission are described, both for the mothership and Deorbiter CubeSat. The performance of each spacecraft during their operations is investigated, using the actual performance specifications of the onboard components. The viability of the proposed debris removal approach is discussed in light of the results.     

俯斜墙背条件下朗肯与库伦土压力理论的研究

从挡土墙抗滑、抗倾覆安全系数和挡土墙的主动土压力两个角度，研究建立在朗肯土压力理论与库伦土压力理论基础上的不同主动土压力计算方法所带来的误差，认为在俯斜的挡土墙墙背条件下，应使用抗滑、抗倾覆安全系数来判断土压力计算方法是否合理。     

Astrophysics in 2006

The fastest pulsar and the slowest nova; the oldest galaxies and the youngest stars; the weirdest life forms and the commonest dwarfs; the highest energy particles and the lowest energy photons. These were some of the extremes of Astrophysics 2006. We attempt also to bring you updates on things of which there is currently only one (habitable planets, the Sun, and the Universe) and others of which there are always many, like meteors and molecules, black holes and binaries.     

稀土对电沉积镍基复合镀层高温抗氧化性的影响

研究了稀土加入三种电沉积镍基复合镀层Ni—B_4C、Ni—TiC、Ni—ZrO_2前后,在850℃时的氧化行为。通过金相观察、ESCA(光电子能谱)分析及X射线衍射等方法研究表明:镀层中不同的复合颗粒和稀土两者对镀层的抗氧化能力均有影响。其小不同种类的颗粒对镀层抗氧化能力所产生影响的差别很明显;而稀土对镀层抗氧化能力影响的差别较小,且影响的程度比较接近。另外,两者影响的机理也不同。颗粒是通过分解、扩散等过程改变表面膜的组成来影响的,而稀土则是从提高膜的致密度和膜与基体的粘附性来影响的。作者认为,它们的影响既互相独立,而又互相补充。     

移动刚体激励下弹性梁的振动及其主动控制研究

本文研究了移动刚体激励下弹性梁的振动响应，以简支一弹怀支承梁为例进行了分析计算和实验研究。进而又提出了对弹性梁振动的最优控制方案，并进行了相应的仿真计算和实验研究。所有的实验结果同分析计算结果完全一致。     

硝酸羟胺水溶液的制备及其含量分析

以复分解法制备硝酸羟胺(HAN)水溶液，用正交实验分析了反应温度、反应时间和减压蒸馏温度对反应产率的影响。确定的实验室最佳制备条件为：反应时间25min，反应温度60℃，减压蒸馏温度50℃。并比较了氧化还原滴定法与酸碱滴定法测定硝酸羟胺水溶液中硝酸羟胺含量的精度。     

基于特征模型的挠性悬臂板控制

针对航天器上太阳帆板这种悬臂外伸薄板结构的挠性附件 ,存在环境扰动下所引起的振动 ,本文采用压电智能结构作为执行器对悬臂板进行主动振动控制。基于板系统的特征建模 ,并结合自适应控制对挠性板的主动控制进行了研究。通过仿真研究结果与应变律反馈控制比较 ,表明该方法的有效性     

直接力与气动力复合控制系统姿态稳定问题研究

大气层内直接力与气动力复合控制导弹具有响应快速、可用过载大等优点，可以拦截高速、高机动性目标。研究制导末端轨控直接力与气动力复合系统姿态稳定问题。首先分析了复合系统的特点和控制问题，建立了控制模型。然后应用扩张状态观测器观测对象模型内扰和外扰的实时作用量，进行反馈补偿，实现了动态线性化。最后设计了非平滑反馈控制律，从而实现了复合系统的姿态控制设计。仿真结果表明，系统具有良好的动态性能和稳态性能，控制器具有很强的鲁棒性。     

添加剂含量对二硅化钼发热体抗氧化性能的影响研究

研究了添加剂含量对MoSi2发热体性能的影响,使用SEM观察各种添加剂含量试样的微观组织,测定各种添加剂含量试样的氧化动力学曲线、致密度、烧损温度。     

高温合金纳米晶涂层的发展

高温合金纳米晶涂层是一种新的高温合金防护涂层体系.与目前通常采用的涂层不同,其成分与基体合金基本相同,有良好的抗氧化性能,且避免了传统涂层高温使用后在涂层与基体间因互扩散形成的脆性有害相.高温合金纳米晶涂层是在研究晶粒度对合金抗氧化性能影响的基础上发展起来的.本文综述了国内外对晶粒细化影响铁基合金、金属间化合物、高温合金等氧化性能的研究概况,重点介绍了高温合金溅射纳米晶涂层的研究结果.